We Bharat Pumps Industries are Leading Manufacturers, Suppliers, Providers, Dealers and Traders of Positive Displacement Lobe Pump. Positive displacement pumps displace a known quantity of liquid with each revolution of the pumping elements. This is done by trapping liquid between the pumping elements and a stationary casing. Pumping element design include gears, lobes, rotary pistons, vanes and screws.This type of pump has an expanding cavity on the suction side and a decreasing cavity on the discharge side. Liquid flows into the pump as the cavity on the suction side expands and the liquid flows out of the discharge as the cavity collapses. The volume is constant given each cycle of operation.In general, positive displacement pumps, unlike centrifugal pumps, will produce the same flow at a given speed (RPM) no matter the discharge pressure.These pumps must not be operated against a closed valve on the discharge side of the pump because it has no shut-off head like centrifugal pumps. A positive displacement pump operating against a closed discharge valve will continue to produce flow until the pressure in the discharge line has increased until the line bursts or the pump is severely damaged - or both.

A relief or safety valve on the discharge side of the pump is therefore absolute necessary. The relief valve can be internal or external. The pump manufacturer has normally the option to supply internal relief or safety valves.The internal valve should in general only be used as a safety precaution, an external relief valve installed in the discharge line with a return line back to the suction line or supply tank is recommended.These pumps can be divided in two main classes, reciprocating positive displacement pumps and rotary positive displacement pumps. We Bharat Pumps Industries are deeply engaged in offering a wide array of Positive Displacement Lobe Pump to our valuable Clients located in Mumbai, Navi Mumbai, Thane, and all over India.